Specifications for Bolt

Operating Envelope

Maximum Height

8’ (2.45m)

Lowest position

0

Maximum reach (from rotate centre)

5’ (1.5m)

Rig Dimensions

Height

6’3” (1.9m)

Base Width

42”x54” (1070mm x 1375mm)

Practical Shooting Speeds

Move

Speed

1m vertical move

Half a second

1m horizontal move

Half a second

Complete 180 degree arc with a 75c radius

1.5 seconds

Complete 180 degree arc with a 45cm radius

1 second

Rig Performance

Axis name

Range of travel

Maximum Speeds

Rotate

+/-160 degrees

200 degrees per second

Lift

+/- 1137 degrees

200 degrees per second

Arm

+/-150 degrees

255 degrees per second

Pan

+/-270 degrees

315 degrees per second

Tilt

+/-120 degrees /
-105 degrees

350 degrees per second

Roll

+/- 270 degrees

870 degrees per second

Rig Weights

 

Kg

Lbs

Bolt Rig

430

948

Power Supply Unit

60

133

Flair Console Flight Case

40

88

Counter Weights
(if not screwed to the floor)

560

1235

Maximum Camera Payload

28

61

Power Requirements

While the Bolt can be used with counter weights for some shots, if you are looking to achieve the highest speeds with the smoothest possible results the optimum mounting for the rig is to fix it to the floor. This is the suggested method of use. Camera Control brings to set the equipment necessary to fix to sound concrete floors. It only requires x4 20mm holes drilled to a depth of 65mm, these are filled with m16 plugs that the rig can be screwed into.

Power Connection

3ø 220 volts

CONTACT

Telephone

(310).581.8343

Fax

(310).581.8340

Address

3317 Ocean Park Boulevard
Santa Monica
California
CA 90405
USA

Camera Control Inc

PRECISION PORTABLE MOTION CONTROL

Terms & Conditions

MRMC product videos music by Ingo Ludwig Frenzel

Website by LaytonKloss